Established in 1979
1.800.567.0785
905.738.7810

Rubber Rolls and Sheet
Rubber Rolls and Sheet

Cylindrical Mounts
Cylindrical Mounts

Our mounts cover a wide spectrum of applications.

Spring Mounts
Spring Mounts

Available in 0.75" - 1.0" and 2.0" deflection these mounts provide a solution to low frequency vibration problems. Spring mounts are for higher static deflection and are designed for noise and vibration reduction in critical areas such as concrete or wood bases and mounting floors.

Anti Vibration Machinery Mounts
Anti Vibration Machinery Mounts

Leveling Mounts
Leveling Mounts

Spring Hanger
Spring Hanger

Spring hangers are used for hanging: fan coil units, air handling units fans, pipes and ducts. Assembly incorporates steel and elastomer washers for uniform load distribution and high frequency isolation. Features interchangeable spring capacities in same frame.

Anti-Fatigue Matting
Anti-Fatigue Matting

VM-VMT
VM-VMT

Where simple and precise leveling is required. Load range of up to 12,000 lbs. with leveling feature make this mount very popular for numerous industrial applications.

CRS
CRS

Free-standing Cup mounts are designed for effective isolation from vibration, shock and noise. Ideal for application that do not require precise leveling. Available in either plated steel CRS or type 304 stainless steel CSS.

FMD
FMD

FMD series double deflection compression mounts have great elasticity in axial-radial direction and provide excellent isolation from vibration and noise. This model is designed for compression loads and is not recommended for shear or tension load. Maximum recommended shock loads should not exceed 50% of maximum vertical load.

Low Frequency - Double deflection Compression Mounts
Low Frequency - Double deflection Compression Mounts

LF mounts superior elasticity and provide effective isolation from vibration. LF mounts are designed for compression loads and are not recommended where shear or tension load exists. For shock applications maximum load should be less than 25% of maximum rated vertical load.

VHDL - Heavy Duty Leveling Mount
VHDL - Heavy Duty Leveling Mount

VHDL Mounts Heavy-Duty leveling mounts are designed for applications where loads range up to 250,000lbs. per mount. VHDL mounts provide precise leveling, stability, deflection as well as superb protection from impact shock forces.

VHDI Heavy Duty Isolator
VHDI Heavy Duty Isolator

VHDI mounts are extremely stable and provide excellent protection from vertical and impact shock forces.

VSCM / CMSS Cup Mounts
VSCM / CMSS Cup Mounts

VSCM / CMSS Compression-shear cup mount with base, provides excellent protection against vibration and shock. Due to this mount's ability to provide isolation to both vertical and horizontal forces it is used in a wide variety of industrial applications.

Bearing Pads Blocks and Shims
Bearing Pads Blocks and Shims

Non-reinforced plain pads are molded in a single layer from the shore A 90 Durometer Red Neoprene. Bearing pads are designed for high loads and limited deflection. Waffle top and bottom surfaces reduce creeping walking and provide good horizontal shear resistance. Excellent adhesion to metal allows building of multi-layer neoprene-metal systems to accommodate almost any request.

Diaphragm and Gasket
Diaphragm and Gasket

Products Category
ANTI - VIBRATION 
MACHINERY MOUNTS
ANTI - VIBRATION MACHINERY MOUNTS
LEVELING MOUNTS | FEET
LEVELING MOUNTS | FEET
CYLINDRICAL MOUNTS  - BOBBINS
CYLINDRICAL MOUNTS - BOBBINS
CENTER BOLTED MOUNTS
CENTER BOLTED MOUNTS
PLATE MOUNT
PLATE MOUNT

SPRING AND ELASTOMER HANGERS
SPRING AND ELASTOMER HANGERS
SPRING MOUNTS
SPRING MOUNTS
ANTI VIBRATION PADS
ANTI VIBRATION PADS
BLOCKS | SHIMS
BLOCKS | SHIMS
RIBBED RUBBER MATTING
RIBBED RUBBER MATTING

ANTI - FATIGUE MATTING
ANTI - FATIGUE MATTING
INDUSTRIAL RUBBER ROLLS
INDUSTRIAL RUBBER ROLLS
DIAPHRAGM AND GASKET
DIAPHRAGM AND GASKET
SKIRTBOARD RUBBER
SKIRTBOARD RUBBER
LOAD BEARING PADS
LOAD BEARING PADS

DURAFLEX RUBBER
ACOUSTIC CONTROL UNDERLAY
ACOUSTIC CONTROL UNDERLAY
ATHLETIC FLOORING
FITNESS MAT
ATHLETIC FLOORING FITNESS MAT
CUSTOM MADE PRODUCTS
CUSTOM MADE PRODUCTS
WALL AND ROOF /CEILING MOUNTS

CARGO RESTRAINT MATS
CARGO RESTRAINT MATS

Welcome to VibraSystems Inc.

 Vibrasystems Inc. specializes in custom molding, design, and manufacturing of anti-vibration, shock and noise control products. Every product is tailored in accordance with customer’s specifications. We also specialize in vulcanizing (rubber-metal bonding process), rubber and metal molding, manufacturing of machinery mounts, spring hangers, spring mounts, and pipe supports.